Electrical Hydraulic Small Size Chamber Filter Press

Electrical Hydraulic Small Size Chamber Filter Press

Introduction to Chamber Filter Press:

Chamber Filter press is the type of filter press that only use chamber filter plates, no diaphragm(membrane) squeeze plates. Chamber filter press can not perform secondary squeezing after the filling process completed. as a result, chamber filter press usually are not as effective as diaphragm filter press in reducing water content, however, chamber plates are only half prices of diaphragm plates, so initial investment and operation cost would be less. it is especially suitable for those jobs that has higher tolerance for remaining water content. Meanwhile we also developed a new type of High Pressure Chamber Filter Press, its filtration pressure can reach more than 1.2 MPa; with this pressure, it can acheive similar results as diaphragm filter press.

Working principle of Filter Press:

1. Filter press is composed of a frame, Filter Plate, pressure system (manual, hydraulic, mechanical three forms) and the electrical control cabinet.

2. The frame part supports pressure device and the filter plates, from the base, pressing plate, the thrust plate and the main girder.

3. The filter plate is installed between the pressure plate and the thrust plate girder, meantime with Filter Cloth.

4. At work, by the clamping device (oil cylinder piston rod or wire rod) push the pressure plate, will be located in the pressure plate and the thrust plate between the filter plate and filter cloth clamp, by compression between the filter plate and filter plate to form the filter chamber, the feed pump into the material from the thrust plate feed opening into the filter chamber, solid particles trapped in the filter room, and filter cake formation, the liquid is through the filter cakes and filter cloth made from the SAP of the hole outside eduction body. If you need cleaning of filter cake, available on the transom lotion mouth pass into the washing water for cleaning filter cake. If the filter cake must be dry, wash mouth ventilation with compressed air, then blow dry cake.

5. Plate And Frame Filter Press and box pressure filter structure is the same, just filter part is a box of filter cloth and a plate, plate and frame space is the filter chamber.

6. Filter press flow is divided into two forms: free flow and undercurrent flow. Free flow refers to the fluid filtrate from each filter plate hole directly discharge closed; Undercurrent refers to various pieces of filter plate filtrate together by the hole of produced liquid discharge outside.

Parameters:

Model	Filter area (㎡)	Plate size (mm)	Cake thickness (mm)	Filter chamber volume(L)	Plate Qty	Filtration pressure (Mpa)	Motor power (kw)	Weight (kg)	Dimensions LxWx H(mm)
XMGY30/870-U	30	870*870	≤35	498	23	<=0.8	4	3046	3880*1250*1300
XMGY40/870-U	40			623	29			3593	4270*1250*1300
XMGY50/870-U	50			789	37			4057	4790*1250*1300
XMGY60/870-U	60			955	45			4597	5310*1250*1300
XMGY70/870-U	70			1121	53			5136	5830*1250*1300
XMGY80/870-U	80			1287	61			5636	6350*1250*1300
XMGY50/1000-U	50	1000*1000		776	27		4	4352	4270*1500*1400
XMGY60/1000-U	60			943	33			4480	4770*1500*1400
XMGY70/1000-U	70			1109	39			5263	5130*1500*1400
XMGY80/1000-U	80			1275	45			5719	5560*1500*1400
XMGY100/1000-U	100			1608	57			6555	6410*1500*1400
XMGY120/1000-U	120			1941	69			7466	7260*1500*1400
XMGY80/1250-U	80	1250*1250	≤40	1560	29		5.5	10900	4830*1800*1600
XMGY100/1250-U	100			1975	37			11750	5440*1800*1600
XMGY120/1250-U	120			2391	45			12600	6060*1800*1600
XMGY150/1250-U	150			2911	55			13620	6820*1800*1600
XMGY160/1250-U	160			3119	59			14470	7130*1800*1600
XMGY200/1250-U	200			3847	73			15320	8200*1800*1600
XMGY240/1250-U	240			4679	89			16170	9420*1800*1600
XMGY250/1250-U	250			4783	91			17020	9570*1800*1600
XMGY200/1500-U	200	1500*1500		3809	49		11	26120	7140*2200*1820
XMGY250/1500-U	250			4723	61			26930	7730*2200*1820
XMGY300/1500-U	300			5637	73			28160	8720*2200*1820
XMGY350/1500-U	350			6551	85			29600	10110*2200*1820
XMGY400/1500-U	400			7618	99			31500	11260*2200*1820
XMGY450/1500-U	450			8532	111			33400	12250*2200*1820
XMGY500/1500-U	500			9446	123			33380	13240*2200*1820
XMGY600/2000-U	600	2000*2000		11901	85		15	54164	13030*3000*2500
XMGY700/2000-U	700			13838	99			58300	14390*3000*2500
XMGY800/2000-U	800			14945	107			62460	15770*3000*2500
XMGY900/2000-U	900			17713	127			66620	17150*3000*2500
XMGY1000/2000-U	1000			19651	141			70780	18530*3000*2500

Filter Press Photos:

Filter Press Usages:

Pollution treatment: Stone wastewater, dyeing wastewater,leather wastewater, printing
Ceramics class: kaolin, superfine glass powder, fire-proof material, silica sand, spray soil grain, mud, abrasive resistance and meters brick materials, artificial black lead, hydrated lime, mica, aluminum oxide, calcium carbonate.

Food: sugar, salt, alkali, monosodium glutamate, soya-bean milk, yeast, glucose powder, wheat starch, wheat flour, rice flour, skimmed milk powder, fruit juice, dehydrated vegetables, coarse sugar, pineapple juice, corn starch.
Metallurgical mining: Coal Washing, lead powder, zinc powder oxygen, the diamond powder, aluminum and iron powder.

Contact:

Looking for ideal Small Size Chamber Filter Press Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Hydraulic Small Size Chamber Filter Press are quality guaranteed. We are China Origin Factory of Electrical Hydraulic Chamber Filter Press. If you have any question, please feel free to contact us.

Product Categories : Paper Industry Filter Press > Paper Industry Chamber Filter Press