Model No.: XGZ50/1000-U
Structure: Cantilever Beam Type
Filter Material: PE
Pressure: Hydraulic Pressure
Type: Diaphragm Filter Press
Color: As Your Requirement
Pressure Type: Hydraulic
Cake Thickness: 30mm
Filtration Press: 0.8 Mpa, 0.6 Mpa
Filter Area: 40㎡
Plate Size: 900x900mm
Number Of Plates: 49 Pieces
Product Name: Low Moisture Content Filter Press
Packaging: wooden box or with plastic film
Place of Origin: China
Supply Ability: 30 sets per month
HS Code: 84741000
Membrane Filter Press plates consists of membrane plate and chamber plate. Slurry is sent to the filter chamber by feeding pump.
Liquid passes through the Filter Cloth and discharges, leaving solid behind to form cakes.
Then the air will be pressed to the chamber for second squeezing, which make the moisture content more lower than normally Filter press.
Our plates of membrane filter press adopt high quality PP, which are non-toxic, with good flexibility, smooth operation in high pressure.
The inner part of membrane plates are hollow, which are made and pressed by high pressure and high temperature machines. The feature of membrane filter press are second compression.
When the primary compression is over, the air will be feed in through the middle hole of the plates, which make each hollow plates expand, thus the material between the plates would be second compressed. And the air also helps the liquid oil fall out to drain.