Hebei TianGuan Filter Press Co., Ltd.
Model No.: X M/A Y40/700-U
Structure: Belt Type
Filter Material: FRPP
Pressure: Mechanical Pressure
Type: Chamber Filter Press
Product Name: Hydraulic Chemical Industry Chamber Membrance Filter Press
Filter Suqare: 40㎡
Filter Capacity: 500L
Frame Size: 700×700 MM
Plates Qty: 49
Cake Thinkness: 30 MM
Machine Size: 4650×1200×1200 MM
Main Power: 2.2kw
Working Pressure: ≤0.7Mpa
Packaging: filter press equipment usually packed in 20' container .Size :3180*1200*1300mm . Weight :3046kg .
Productivity: 1180L/ time
Place of Origin: Cangzhou China
Supply Ability: 30
HS Code: 8474100000
TianGuan Chemical Industry Chamber Membrane Filter Press adopts international advanced TPE membrane technology, so that ensure stable performance and long life-span, and widely used for various industries.Cake from Membrane Filter Press can be secondarily squeezed under max 1.6MPa by water to realize the lowest cake residual moisture. In some wastewater treatment industries, the final cake can be used for landfill or burning directly.The membrane Filter Press can realize fully automatic operation with flexible devices, such as: belt conveyor, drip tray, cloth washing system, etc.
Model Filter Area(m²) Filter Capacity(L) Plate size(mm) Plates Qty Cake Thickness(mm) X M/A Y 20/700-U 20 250 700×700 24 30 X M/A Y 30/700-U 30 380 700×700 37 30 X M/A Y 40/700-U 40 500 700×700 49 30
Chemical Industry Chamber Membrane Filter Press Detail Photo
Chemical Industry Chamber Membrane Filter Press Structure and operating principle
1. Filter press consist of frame ,Filter Plate ,pressing system(manual , mechanical or hydraulic ) and electric control cabinet .
2. Frame consists of base , push plate and girder and supports the pressing device and filter plates .
3. Filter plates are installed on girder between tail plate and push plate , with Filter Cloth sandwiched in them.
In operation , the pressing device(cylinder piston rod or screw ) drives the push plate to press the filter plates and filter cloth between push plate and tail plate . Filter chambers are formed between pressed filter plates and material get in to The filter chambers through the feeding port in tail plate . Solid particles are trapped in filter chambers form into cakes , while liquid is discharged out of the tail Plate . In similar manner ,to drying the press cakes , compressed air can be introduced through the washing port .
4. Plate and frame type filter-Press is the same as Recessed Plate Filter Press in structure ,except the filtering part that consists of one plate , one frame and filter cloth ,with filter chamber between plate and frame.
5. Liquid stream of filter press can be divided into exeternal stream and internal stream . exeternal streamrefers to that the filtrate is discharged directly from outlet port of filter plate; internal stream refers to that the filtrate from various filter plate is collected before being discharged out of the filtrate port .
After-sales Service of Chemical Industry Chamber Membrane Filter Press:
1.Documents supplied: Foundation/Circuit Diagram/Filter Cloth (or Filter Plate).
2.Site commissioning, installation and training service are valid.
3.Warranty: 13 months after B/L data.