Hebei TianGuan Filter Press Co., Ltd.
Model No.: TianGuan-X001
Structure: Belt Type
Filter Material: FRPP
Pressure: Mechanical Pressure
Type: Chamber Filter Press
Product Name: Automatic Hydraulic Chemical Industry Chamber Filter Press
Filter Suqare: 40 ㎡
Filter Capacity: 640 L
Frame Size: 710×710 MM
Plates Qty: 49
Cake Thinkness: 30 MM
Working Pressure: ≤0.7Mpa
Machine Size: 3370×1200×1200 MM
Main Power: 2.2 KW
Packaging: filter press equipment usually packed in 20' container .Size :3180*1200*1300mm . Weight :3046kg .
Productivity: 1180L/ time
Place of Origin: Cangzhou China
Supply Ability: 30
HS Code: 8474100000
TianGuan Sludge Filter Press for solid liquid separator is composed by diaphragm plate andcommon plate. the filter chamber is arranged under the one membrane plate by common plate. The slurry is fed into the filter chamber under the pressure of the feeding pump. slurry into the filter chamber, Separation of solids and liquids from the slurry by filtration medium (Filter Cloth). When the solids in the slurry form the cake, the air is sent to the diaphragm and the solid in the filtration chamber is fully pressed. To get the lower moisture content, especially for viscous materials and for users with high water filtration requirements, this machine can be suitable as the unique characteristics. The Filter Plate is made of reinforced polypropylene and the diaphragm is inlaid with polypropylene, that is firm and reliable. Not easy to shed, long lifetime. It is equipped with a variety of safety devices to ensure the safety of operators and the normal operation of the Filter press.
Sludge filter press for solid liquid separator Techincal Data
Model Filter Area(m²) Filter Capacity(L) Plate size(mm) Plates Qty Cake Thickness(mm) B M/A Y 20/710-U 20 320 710×710 24 30 B M/A Y 30/710-U 30 480 710×710 37 30 B M/A Y 40/710-U 40 640 710×710 49 30
Sludge filter press for solid liquid separator Detail Photo
Sludge filter press for solid liquid separator Structure and operating principle
1. Filter press consist of frame ,filter plate ,pressing system(manual , mechanical or hydraulic ) and electric control cabinet .
2. Frame consists of base , push plate and girder and supports the pressing device and filter plates .
3. Filter plates are installed on girder between tail plate and push plate , with filter cloth sandwiched in them.
In operation , the pressing device(cylinder piston rod or screw ) drives the push plate to press the filter plates and filter cloth between push plate and tail plate . Filter chambers are formed between pressed filter plates and material get in to The filter chambers through the feeding port in tail plate . Solid particles are trapped in filter chambers form into cakes , while liquid is discharged out of the tail Plate . In similar manner ,to drying the press cakes , compressed air can be introduced through the washing port .
4. Plate and frame type filter-Press is the same as Recessed Plate Filter Press in structure ,except the filtering part that consists of one plate , one frame and filter cloth ,with filter chamber between plate and frame.
5. Liquid stream of filter press can be divided into exeternal stream and internal stream . exeternal streamrefers to that the filtrate is discharged directly from outlet port of filter plate; internal stream refers to that the filtrate from various filter plate is collected before being discharged out of the filtrate port .
After-sales Service of Sludge filter press for solid liquid separator:
1.Documents supplied: Foundation/Circuit Diagram/Filter Cloth (or Filter Plate).
2.Site commissioning, installation and training service are valid.
3.Warranty: 13 months after B/L data.