Views: 0 Author: Site Editor Publish Time: 2020-05-06 Origin: Site
Diaphragm filter press has high efficiency, low energy consumption, dehydration, simple structure, convenient maintenance, low noise, stable operation, reliable and continuous automatic production. It is widely used in the solid-liquid separation of petroleum, chemical, coal, metallurgy, building materials, textile, food and water environmental protection projects.
When the working time of the hydraulic system of the diaphragm filter press is too long, the fatigue performance of the diaphragm filter press will appear several kinds: First, the temperature of the belt filter press is too high, and the heat is large. Secondly, the belt filter press has insufficient power and is very weak. If the temperature is too high, we can consider replacing the high-temperature hydraulic oil in the belt filter press with new hydraulic oil, which can quickly reduce the temperature of the belt filter press body. If the belt filter press is not secure, it will take some time to shut down and stay for a while. Only in this way can the life of the machine be extended.
The entire diaphragm filter press equipment relies on the hydraulic system to provide strong power, and the entire diaphragm filter press is inseparable from the hydraulic system. Including the squeezing of the filter plate, the pulling back of the pushing plate, the estimation of the operation of the pulling plate trolley, etc., are inseparable from the hydraulic system. Therefore, the frequency of the belt filter press system applied to the entire equipment is very high, and it is a particularly depleted component of the belt filter press. Correctly keep the belt filter stationary so that it can work more efficiently.
In the ordinary use of membrane filter presses, we often find that the membrane filter press has the appearance of heat generation. This heat generation will affect the use of the filter press, so how can we eliminate this appearance of overheating. There are two reasons for the overheating of the diaphragm filter press: one is the hydraulic system, and the other is the filter plate of the filter press. The hydraulic system of the filter press is closely related to the temperature. The temperature can be controlled by the heat dissipation equipment of the equipment, so that the filter press can be operated normally, and the need to pay special attention to the temperature of the hydraulic station should not be too high, because This will affect the hydraulic system and then cause the system to not function properly. The filter plate of the filter press is made of polypropylene. It can effectively avoid overheating, slow down the temperature increase, and reduce the increase of the decomposition and oxidation of the filter plate of the filter press, and the cycle of the filter plate. .