Views: 0 Author: Site Editor Publish Time: 2020-04-21 Origin: Site
The hydraulic system of the diaphragm filter press has a hydraulic station for pumping and storing oil. The storage space of the hydraulic station is also very limited, so it is necessary to regularly add suitable hydraulic oil to the hydraulic station. Under normal conditions, this amount may be about 85%, because as the oil temperature increases, the volume becomes larger and excess oil will directly affect the normal operation of the hydraulic station. with. The amount of oil in the hydraulic station must not be less than 40%, because too little oil will affect the pumping of the internal pump. Therefore, in daily life, it is necessary to regularly check and maintain the hydraulic station.
The method of using the membrane filter press for the membrane filter: first, we need to clean the groove and leak the new filter plate surface. Next, a black and white repair agent for oil surface repair agent was prepared in a 1: 1 ratio. Good; then, apply it to the groove, fill the groove and slightly above the surface of the filter plate; spread the groove, quickly cover the filter cloth, squeeze the filter plate, make the repair agent and filter cloth thick. When the grooves are pressed together, the glue forms naturally and does not change, and can be used normally. The filter plate and filter cloth are in direct contact with the filtrate in the production of the filter, so they lose more than other components! Relatively speaking, the filter cloth is relatively cheap and relatively easy to repair, but the filter plate is different. For each manufacturer, the repair of the filter plate is a troublesome problem. However, the successful development of the oil surface repair agent solved the problem of difficult repair of the filter plate, saving us a lot of money and materials.
The hydraulic system of the diaphragm filter press is very important to the whole system. The selected hydraulic oil has a great influence on the plate and frame filter press. Hydraulic oil can provide strong pressure for the filter press. If you want the filter press to work properly, you need strong pressure. When choosing hydraulic oil, please consider various factors and choose neutral pressure oil that is resistant to wear and pressure.