Views:0 Author:Site Editor Publish Time: 2020-04-23 Origin:Site
The filter plate of the filter press exhibits this condition. It may be that there is too much oil and dirt on the guide rod, so that the friction between the guide rod and the touched part is too large, and the hydraulic circuit of the hydraulic cylinder is abnormal. To deal with similar problems, clean the guide rod in time and apply butter to ensure its lubricity. It is particularly important to note that it is forbidden to apply thin oil to the guide rod. The thin oil is easy to fall and the bottom is very slippery. It is very easy to fall, pay more attention. The other thing is to check if there is any kneading or clogging in the oil circuit, so as to clear the oil circuit.