Views:1 Author:Site Editor Publish Time: 2020-05-13 Origin:Site
After the sludge filter press is frequently used, the fuselage and interior will present some waste and waste that is not needed during use. At this time, we need to clean the sludge belt filter press. During the operation of the sludge belt filter press, the filter cloth and the filtrate are in contact for a long time, and the external pressure is too high, so the solid particles are more and more attached to the filter cloth. If the sludge belt filter press is not cleaned in time, it will cause problems in the subsequent use of the sludge belt filter press, affecting the service life of the sludge belt filter press and causing serious pollution. The sludge belt filter press is clogged, and then the sludge belt filter press can be burned. Therefore, it is very important to organize the operation of the sludge belt filter press. The sludge belt filter press is the same as other equipment, and the cleaning process is not too messy. Let us learn today with the editor how to arrange the sludge belt filter press.
First of all, please note that before cleaning, we need to understand the nature of the filter cloth filter, and then choose the corresponding cleaning method: pick the weak alkaline water to soak the filter cloth, also generally soak for 10 to 24 hours, and then cover the filter cloth with deep water, then It is washed with water and then dried to 90% dryness, and can be operated again. Also resists the acidity of the neutral filter, we just need to change the injection solution to weak acidity.