Views:0 Author:Site Editor Publish Time: 2020-04-09 Origin:Site
1. Before starting, it is necessary to check the concentration of the filtered initial liquid to ensure its certain fluidity. In order to avoid overdrying, the damage to the filter chamber of the press.
2. Before the filter press starts, it is necessary to check whether the transmission, hydraulic and lubrication systems are in good condition, check the safety of the circuit, and ensure that there is no damage and the pipeline for discharging water is unobstructed. You can't start the machine until these are confirmed.
3. Press the filter press tightly and make the material. Make sure the time of making the material according to the concentration of the filtrate, the permeability of the press cloth, the ratio of agents, the dosage and the water output. The press stops, the head plate is pulled back, and then the pull plate is unloaded.