Views: 0 Author: Site Editor Publish Time: 2020-04-10 Origin: Site
For the filter press, regular maintenance is required to ensure the normal operation of the equipment. While maintaining, there is also the problem of adjusting filter press components. During the work of the filter press manufacturer, some parts of the filter press will become loose or even aging, and timely treatment, otherwise it will affect the normal operation of the frame filter press. I do n’t know which parts of the frame filter press need to be adjusted regularly?
First of all, the place where the plate-and-frame filter press equipment needs to be adjusted is the hydraulic control instrument. When using the previous frame and frame filter press equipment, according to production needs, we may need to adjust the pressure generated by the hydraulic system, which can be adjusted up or down. We all know that it can be passed through the hydraulic console. Such a purpose.
Secondly, the place where the plate and frame filter press equipment needs to be adjusted is the filter plate handle. For the filter plates, in addition to controlling the support points of the filter plates, the handle is placed in the device, and the uniformity of all filter plates is fixed to keep them consistent.
In order to be able to complete the work earlier, many plate and frame filter press operators use increased pressure to control the plate filter press plates. However, when the pressure is increased to solve the working problem, it is easy to make the filter plate of the plate filter press achieve the working effect. This is a situation where the so-called plate-and-frame filter press is overused.
When it is overused, one thing we often think of is the production pressure of plate and frame filter press equipment. Because the important function of pressure in the plate and frame filter press equipment is to affect the filter chamber, thereby controlling the production effect of the plate and frame filter press. Moreover, due to the pressure of the filtrate, the filter chamber can be operated quickly, so the pressure is one of the factors that affect the operation of the plate and frame filter press.
Because the previous operator increased the pressure of the plate and frame filter press in order to complete the work earlier, the filter plate of the plate filter press will always run under such a high pressure environment, this operation will not immediately react to open the filter plate Only after a long period of work can the plate and frame filter press equipment be overworked. When a problem occurs, all filter plates on the plate and frame filter press equipment are damaged. Then there will be a high cost. More serious will also cause deformation of certain parts of the frame filter press equipment, etc., to make it run.
About feed pump. Plate and frame filter presses use it to carry liquids. If it provides too much filtrate, it is not allowed to remove the plate and frame filter press equipment at once. This will not only cause external leakage, but also prevent the plate and frame filter press from maintaining normal operation.